Product
More>>Contact
| Clamping Force：35-2000 TON |
| lnjection Capacity：30-1800g |
| Main Features： 直立合模，卧式射出。 Vertical clamping,horizontal injection. 射座高度可调整，镶件模具可更灵活性设计。 The position of injection unit is freely adjustable. Makes the tooling design more easlier. 可选择单、双滑板及圆盘机型，增加产能及安全性。 It is can be equipped with single/doubie skateboarding, disc, etc.,in order to improve operational safety and efficiency. |
规格 Specifcations（可选配高速射出240-1000mm/sec及伺服机）
| 参数(Parameter)\型号(Model) | UNIT | KWT-300T-HR | ||||
 | 射出系统 | 螺杆直径 Screw Diameter | mm | 60 | 70 | 80 |
| 射出压力 Iniection Pressure | kg/c㎡ | 1600 | 1500 | 1300 | ||
| 射出量 Max.shot Weight(PS) | g | 500 | 800 | 1200 | ||
| 螺杆行程 Injection Rate | mm | 220 | ||||
| 螺杆转数 Screw Speed Max | Turn | 0-260 | ||||
| 射嘴行程 Nozzie Retraction | mm | 210 | ||||
| 温度控制段数 Number of temperature Control | Snt | 4/5 | ||||
 | 锁模系统 | 锁模力 Clampinh Force | Tons | 300 | ||
| 模板尺寸 Platen Size | mm | 1300*1100 | ||||
| 模柱间距 Distance Between Tie Bere | mm | 750*550 | ||||
| 最小模厚 Min.Mold Height | mm | 350/400（可根据模厚订制） | ||||
| 开模行程 Opening Stroke | mm | 300 | ||||
| 最大开模距离 Max.Open daylight | mm | 650/700（订做机型距离有变化） | ||||
| 顶出压力 Ejetor Force | Tons | 6 | ||||
 | 动力电热系统 | 最大液压压力 Max.Hydaulic Pressure | kg/c㎡ | 140 | ||
| 泵浦吐出量 Pump Outpet | 1/min | 79(伺服机以实际型号为准） | ||||
| 马达电力 Pump Motor Power | kw/HP | 22.5/30KW（伺服电机以实际型号为准） | ||||
| 电热容量 Berrel Heating Power | kw | 12 | ||||
| 总用电量 Total Weight | kw | 36/43 | ||||
 | 其它 | 机器重量 Machine Weight | kg | 15500 | ||
| 机器外型尺寸 Machine Dimensions(L*W*H) | m | 5.5*2.5*3.8 | ||||
规格若有修改，恕不另通知！Specifcations are subject to change without prior notice!
|
中文版
English